Cleaning your CPAP device would be so easy if you used a SoClean CPAP cleaner.
The use of a CPAP cleaning machine is part of the proper maintenance of a CPAP unit. It assists in cleaning the mask, the accompanying air tube, and humidifier. This is difficult for some people. Nonetheless, patients with sleep apnea may not have much of a choice. That may cause them to give up and abandon the therapy. Cleaning your CPAP device would be so easy if you used a SoClean CPAP cleaner. The SoClean pretty much automates CPAP equipment cleaning. Below are fundamental instructions that you should use to better your experience with the SoClean.
SoClean CPAP Cleaner Design and First Impressions
Based on the SoClean reviews consumer reports, a CPAP cleaner is a stylish machine. Its design allows you to place the mask right after waking up in the morning without unplugging it from the CPAP machine into a box. You should stuff the mask into the SoClean’s cavity (including the straps) and close the lid. You are done! CPAP soclean reviews indicate that the SoClean machine turns on automatically at a pre-set time, disinfects the mask, tube, and the humidifier’s water reservoir while you go about your daily routine.
SoClean CPAP Cleaner Setup
If you go through various independent soclean reviews, you may sometimes notice that some instructions that come with the SoClean are confusing. In some reviews, the pictures fail to indicate what needs to be done. According to genuine CPAP cleaner soclean reviews, only a few simple connections need to be made between the CPAP and the SoClean. The machine is plugged into a regular wall power outlet and a little spacer placed to cover up a hole on the side opposite the hole through where the CPAP tube goes through. The device works with most CPAP machines but may need an adapter to connect to specific CPAP models.
SoClean CPAP Cleaner Use
Some SoClean reviews indicate that the SoClean pumping process takes about ten minutes
When using the best CPAP cleaner, stuffing the mask in and closing the lid is a simple issue once the initial setup is complete. It will turn on automatically when you set it to run every day. It takes about ten minutes to run as it generates ozone and pumps it through the connected CPAP equipment. Notably, ozonation is a well-established method of disinfection and is considered to be safe when produced in low quantities. Some SoClean reviews indicate that the SoClean pumping process takes about ten minutes. The mask has to stay inside the SoClean for at least two hours for the disinfection and sanitization process to complete correctly.
We recommend SoClean because it is easy to set up and to use regularly. The soclean price is also very affordable, with a unit going for about $299.