Lumin Ozone-Free CPAP Mask Sanitizer

Lumin CPAP CleanerLumin Ozone-free CPAP mask sanitizer is the easiest and fastest way to sterilize your CPAP mask and accessories. With a push of a single button, its 5-minute fumigation cycle cleans your mask and accessories.

The Lumin CPAP Cleaner disinfects utilizing a very specialized and high powered UVC light source, the same kind of light source used in hospital operating rooms and sterile clean rooms.

UVC light will disinfect up to 99% of harmful bacteria, pathogens, and fungi that can lead to infection and illness. UV light is also the safest disinfection choice on the market and emits NO HARMFUL OZONE. Ozone has been shown by the EPA to irritate the lungs and the respiratory system, making it extra harmful for persons with respiratory illness.

The 3b Lumin Cpap Cleaner machine may be used with all brands of masks and accessories. No adaptors required. Just place your mark and accessories in its drawer, and push the button. No need to measure water or cleaning solutions or filters to change. Best for daily use to ensure your mask and accessories are sanitary and safe for use. The Lumin may also be useful as multi-purpose disinfecting equipment for other personal care products (i.e., electric toothbrush, toys, cell phones, etc.).

How the Lumin CPAP Mask and Accessories Cleaner Cleans

Lumin CPAP cleaner works by emitting high energy light within a narrow spectrum known as UV-C. The Lumin depends on a low-pressure, mercuryarc germicidal lamp intended to produce the highest amounts of UV energy – where 90% of energy is generated around 254nm. The dose of UV-C emitted in one 5-minute cycle is sufficient to destroy most bacteria and mold on a surface. The utilization of UV-C is environmentally friendly, leaves no residue or toxic gases or chemicals. UV-C systems are presently in use to disinfect operating rooms, ambulances, emergency service vehicles, and other high touch areas.

How to Use

Use Lumin Ozone-Free CPAP Mask SanitizerThe Lumin is a single button machine. It certainly could not be any easier. First, wipe the inside of your mask and cushion with a CPAP wipe to eliminate any physical residue. If sterilizing your humidifier water chamber, open the chamber and place it in the drawer face up. If sterilizing your mask, lay your mask in the drawer face up. Close the drawer and press the switch. In 5 minutes, the cycle is finished, and your mask and water chamber are ready for use. Since UV-C disinfection involves light waves, it operates in “line of sight” fashion, only irradiating surfaces within its sightlines. If there is a heightened requirement for disinfection, the mask can be disassembled or a second cycle used after flipping the object over. For general daily use, only one period is required.

  • + No harmful ozone = safe for persons with respiratory illness
  • + Utilizes UV-light to kill bacteria and mold on a surface
  • + Environmentally friendly – no deposits or toxic chemicals
  • + Easy single switch operation
  • + 5-minute fumigation cycle
  • + Compatible with all types of masks and accessories

References and Resources